Environmental risk assessment
Incident commanders should conduct an assessment of the environmental risk at incidents they attend. This will help them to identify the potential risks posed by fire service actions on the environment and the control measures, which can be applied to reduce or, where possible, prevent environmental damage.
An environmental risk assessment should identify:
- Nearby population
- Location of local watercourses
- Location of SSSI/sensitive habitats and their proximity to the incident
- Incident location in relation to sensitive groundwater.
- Local drainage
- Polluting materials
- Type of media being used
- Quantity of firewater run-off being produced
- Volume/properties of any spilt materials
- Weather conditions
For larger, more protracted incidents or where a known risk to the environment has been identified, a formal environmental analytical risk assessment should be completed and recorded.
Any risk to the environment either known or suspected should be communicated to those attending the incident and where appropriate, the relevant agencies. Information on environmental risk assessment is contained in Section 3.4 of the Environmental Protection Handbook.
Pollution control should be carried out using a Source-Pathway-Receptor model. The first action is to identify any hazards to the environment (the source). When a hazard is identified, measures should be taken to prevent or reduce the risk of pollutants reaching (via a pathway) vulnerable parts of the environment (the receptor). For example, contaminated fire water (the source) could travel via surface drains (the pathway) into a local watercourse (the receptor).